Free UK delivery on every orderOrder by 2pm, posted the same working dayCollect the same day in Harrow

Guide

How to fit number plates

Updated 16 November 2026 · By Number Plate Master, a DVLA registered number plate supplier in Harrow

Most people fit their plates in a few minutes. Take off the old plate, clean and dry the surface, then fix the new plate with sticky pads, a screw kit, or both. Line it up straight before you press it down.

What you need

  • Your new plates
  • Our sticky pads (strong double-sided pads) or screw kit (4 screws with caps and clips), £2.49 each when you build your plates
  • A cloth, warm soapy water, and a screwdriver if you use screws

With sticky pads

  1. Take off the old plate. Undo any screws, or ease it off and peel away the old pads.
  2. Clean and dry the surface. Pads hold best on a clean, dry surface, so get rid of dirt, wax and old glue.
  3. Put the pads on the back of the plate. Spread them out: near each corner and along the middle.
  4. Line it up. Hold the plate in place without pressing, and check it’s level and central.
  5. Press firmly. Press along the whole plate for about 30 seconds so every pad makes contact.

If you can, wait a day before washing the car so the pads can bond.

With screws

  1. Hold the new plate against the mount and mark where the car’s screw holes are.
  2. Drill small holes through the plate at the marks, slowly and with a small bit, so the acrylic doesn’t crack.
  3. Fit the clips into the car’s holes if your kit needs them, then screw the plate on. Don’t over-tighten.
  4. Press on the caps so the screw heads match the plate.

Keep the screws clear of the characters, and never cover or change any part of the registration: it must stay easy to read.

Fitting questions

Should I use sticky pads or screws?

Use screws if your car’s plate mount has screw holes; use sticky pads if it doesn’t or if you don’t want holes in your plate. Some people use both: pads to hold the plate flat and screws for extra security.

Do you fit number plates?

No. We make your plates and post them, or you collect them from our shop. Fitting them yourself is quick with our screw kit or sticky pads, £2.49 each.

How do I get old sticky pads off?

Peel them off slowly, then soften what’s left with warm soapy water or an adhesive remover made for car paint, and wipe it away. Clean and dry the surface before you fit the new plate.

Ready to build your plates?

Type your registration, pick a style and see your plates in 3D. Free UK delivery, or collect the same day in Harrow.